6
knotted or heavy or blocked, it could cause electric shock, short circuit or fire.
5.
Power sources other than the rated voltage must not be used. It is recommen-
ded to use the power supply with input voltage of DC-5V and current ≥ 1.5a.
6.
Do not allow children to use the device.
7.
If the power cable is broken, it must be replaced by specialized technicians to
avoid damage.
8.
For internal use only.
9.
Do not put hot water over 40 degrees into the tank to avoid deformation of the
body.
10.
Do not let the water flow into the air intake, it could cause breakdowns.
11.
Please do not add water directly to the tank.
12.
Please do not put metal in the tank, bad atomization may occur.
13.
Keep away from household appliances when the device is in operation.
14.
If the machine is tilted, cut off the power supply before handling it.
15.
If the internal temperature is below 0 degrees, pour the water into the tank, so
as not to damage the machine in case of freezing.
16.
Do not place the device in places directly exposed to intense light or hot air.
17.
If it is not used for a long time, disconnect it from the power supply.
18.
The accelerator must not be washed with water to avoid damaging it.
19.
The product has not been designed for purposes other than those specified in
this manual.
20.
It is not recommended to place the device on furniture and tables.
Operation
Electric Operation
1.
Place the device on the floor and add water.
2.
Connect to the power supply.
3.
In case of lack of water in the tank or low water level in the tank, the safety devi-
ce inside will automatically disconnect the atomization circuit. It will not produce
any cloud and the corresponding icon will light up. If you need to continue saniti-
zing, you must first turn off the power and disconnect the plug, then add water to
the tank. (Note: You need to restart the device when adding water)
4.
After adding the water, close the top lid of the tank and place the diffuser on
the connector in the center. Make sure that the diffuser and its gear engage nor-
mally, otherwise it may cause the swivel diffuser not to work.
5.
Insert the Mini USB cable of the accelerator into the USB port on the back of
the accelerator and the other end into the USB port of the device (Note: the input
voltage of the device is 5V ≥ 1.5a) .After power on, the accelerator enters in standby
