11
ENG
• 001: swipe card for left side but right side freely
• 002: swipe card for right side but left side freely
• 003: left and right are freely
• 004: swipe card for left side but right side is not allowed =005 swipe card for ri-
ght side but left side is not allowed
P02:
Illegal turnstile opening range,turnstile lock and back automatically once out
of range (system default is 10 degree)
P03:
Passing time, measurement is second. Number 10 means 10 seconds. The
pedestrian not pass turnstile within pre-set time, turnstile will close.(system
default is 010,range is 000-060)
P04:
Left side counter reset: press SET , then it display C-L, press INC , press INC or
DEC to reset.
P05:
Right side counter reset: press SET , then it display C-L,press INC or DEC to
reset.
P06:
System default reset :press SET Key, it will display P-2, press INC or DEC to
reset system default.
P07:
Equipment communication address (System default is 001)
P08:
Memory function setup (system default is 003)
• 000: both side with memory,
• 001: left side with memory
• 002: right side with memory
• 003: both side without memory
P09:
Degree of angel after turnstile opening ,default is 15°
P10:
Turnstile operation mode
• 000: both side need dual-signal control
• 001: left side need dual-signal control
• 002: right side need dual-signal control
• 003: Clutch locked automatically after turnstile open and close
P11:
Turnstile can rotate freely after opening ,default is 20°
P12:
Turnstile opening speed before people passing ,default is 18
P13:
Turnstile opening speed when people passing ,default is 16
P14:
Turnstile opening speed after people parsing ,default is 18
P15:
Turnstile reducing angel degree after people passing ,default is 40
P16:
3 arms operation mode
• 000: Arm lift automatically after connect with power
• 001: Turnstile lift by people after connect with power
Exit from menu : Press INC or DEC , it display.
P00, press SET to exit from menu setup.
Summary of Contents for AC-ATRI-018
