Mace LED CCTV User Manual Download Page 12

11

Mace® LED CCTV Security Surveillance Monitors

 

Plugs

—  Do not remove any of the prongs of the monitor’s three-pronged power plug.

—  Disconnect the power plug from the AC outlet under following conditions:

•  If you will not use it for an indefinite period time.

•  When the power cord or plug is damaged or frayed.

•  If the product does not operate normally when the operation 

instructions are followed. Adjust only those controls that are covered by 
the operating instructions. Improper adjustment of other controls may 
result in damage and will often require extensive work by a qualified 
technician to restore the product to normal operation.

•  If the product has been dropped or the cabinet has been damaged.

•  If the product exhibits a distinct change in performance, this indicates  

a need for service.

 

Power and extension cords

—  Do not allow anything to rest on the power cord.

—  Do not locate this product where people will walk on the cord.

—  Use the proper power cord with correct attachment plug type. If the power 

source is 120VAC, use a power cord that has UL and C-UL approvals. If the 
power source is a 240VAC supply, use the tandem (T blade) type attachment 
plug with ground conductor power cord that meets the respective European 
country’s safety regulations, such as VDE for Germany.

—  Do not overload wall outlets or power cords. Ensure that the total of all units 

plugged into the wall outlet does not exceed 10 amperes.

—  Ensure that the total ampere rating of all units plugged into the extension 

cord is not over the cord’s rating.

—  If the power supply cord, which came with your monitor, is to be connected 

to the PC instead of the wall outlet, this equipment is to be used with UL/
TUV approved computers with receptacle rated 100~240V AC, 50/60Hz, 
2.0A(minimum).

 

Environment

—  Place the monitor on a flat and level surface.

—  Place the monitor in a well-ventilated place.

—  Keep the monitor away from: 

 Extremely hot, cold or humid places, places directly under sunlight, dusty 
surroundings, equipment that generate strong magnetic fields.

Summary of Contents for LED CCTV














Reviews: