Operating Your Camera
26
Day&Night Color CCD Camera
27
Day&Night Color CCD Camera
Operating Your Camera
Gain Control
You can see a brighter picture at low light level. Increasing the gain level, you
will see the noise increased although the picture gets brighter.
1. Press the SET button to display the setup menu and move the arrow indicator
to ‘Gain’ using the UP or DOWN button
2. You can control the Gain level at AGC selected.
Caution.
When Gain Limit is set to Low, screen noise will decrease but resolution
decrease.
When Gain Limit is set to High, resolution will increase but screen noise will
increase.
White Balance Control
You can use this when the screen color needs to be controlled.
1. Press the SET button to display Setup menu and move the arrow indicator to
‘White Balance’ using the UP or DOWN button
2. The three white balance control modes are as follows :
ATW
(Auto Trace White Balance )
The camera automatically controls the white balance in any environment
AWC
( Auto White Balance Control )
The white balance is automatically adjusted in a specific environment.
In order to obtain the best result, press the SET button while the camera
focused on white paper.
If the environment including the light source is changed, you have to adjust
the white balance again.
Select AGC or OFF using the LEFT or
RIGHT button
Setup
Camera ID
BLC
Lens
Shutter
Gain
White Balance
Motion Detect
Color
Sync.
Reset
End
OFF
OFF
DC
OFF
AGC
ATW
OFF
AUTO
INT
Select ATW, AWC or Manual
using the LEFT or RIGHT button
Setup
Camera ID
BLC
Lens
Shutter
Gain
White Balance
Motion Detect
Color
Sync.
Reset
End
OFF
OFF
DC
OFF
AGC
ATW
OFF
AUTO
INT
Low/Middle/High
Gain Limit
Middle
Press SET to Return
