15 |
P a g e
Pre Operation Inspection tasks:
Be sure that all decals are legible and in place. See Decals section.
Be sure the main belt is properly tensioned and in good condition.
Be sure the belt carriers are secure and in good condition.
Be sure the correct accessories are present. See parts list.
Check the following components or areas for damage, modifications and improperly
installed or missing parts:
o
Electrical components
o
Limit switch
o
Handset
o
Wiring
o
Stop gate
o
Drive motor
o
Tyres and wheels
o
Brakes
o
Power on lights
o
Nuts, bolts and other fasteners
o
Scaffold clamp
Check entire machine for:
o
Cracks in welds or structural components
o
Dents or damage to the machine
o
Be sure that all structural and other critical components are present and all
associated fasteners and pins are in place and properly tightened.
Summary of Contents for Bumpa Petrol 6m
