18 |
P a g e
Check wheel brakes
Maintaining the brakes is an essential aspect of machine maintenance. Whilst
erecting a machine the operator depends on the brakes functioning.
Check brake function whilst machine is flat on the ground.
1. Move the brake arm back and forth to its extent of travel. Ensure it moves
freely.
o
If brake won’t move or is stiff grease and retry.
2. Ensure wheel cannot be moved whilst brake is operated.
___________________________________
Check stop gate (Electric only)
Ensuring no contaminants are affecting the operation of the stop gate is essential to
ensure proper machine safety functions.
Check stop gate function whilst power is off.
1.
Remove all visual debris and contaminants from around the stop gate.
2.
Press stop gate and listen for a ‘click’ from the limit switch.
o
If there is no audible
‘click’ check the threaded tag is aligned correctly on
the rear.
3.
Repeat 2-3 times to ensure correct function.
Summary of Contents for Bumpa 110v 6m
