MacDon R116, Installation Instructions Manual

Page: 21 / 34

214913
15
Revision B
3.6 Removing Left Inboard Drum, Disc, and Driveline
To remove the inboard drum on the left side of the cutterbar and the associated cutterbar disc and driveline, follow
these steps:
WARNING
Wear heavy gloves when working around or handling knives. Blades are sharp and can cause serious injury.
1011078
A
B
Figure 3.11: Vertical Drive Shield
1. Remove four M10 hex flange head bolts (A) and remove
vertical driveshield (B).
1011077
A
B
Figure 3.12: Cover Plate
2. Remove two M10 hex flange head bolts (A) and remove
cover plate (B).
1011327
A
B
C
Figure 3.13: Top Plate and Drum Top
3. Remove four M10 hex flange head bolts (A), and remove
top plate (B) and drum top (C).
INSTALLATION INSTRUCTIONS