MacDon R116, Installation Instructions Manual

Page: 15 / 34

214913
9
Revision B
Chapter 3: Installation Instructions
To install the Small Drum kit (MD #259140), follow these procedures in order:
3.1 Opening Cutterbar Doors
–
North America
If the pull-type was sold outside of North America, it will have export latches. Refer to 3.2 Opening Cutterbar Doors
–
Export Latches, page 10 .
WARNING
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key from ignition
before leaving operator
’
s seat for any reason.
1. Center the pull-type beneath the hitch, if both doors need
to be opened.
2. Shut down the engine, and remove the key from the
ignition.
1027711
A
Figure 3.1: Cutterbar Doors and Curtains
–
Pull-Type
3. Lift up on door (A) at the front to open.