215333
272
Revision A
1.
Shut down the engine, and remove the key from the
ignition.
1010838
A
B
Figure 4.306: Transport Wheel
1010842
B
Figure 4.307: Field Wheel
2.
Place blocks (A) under opposite wheel to prevent machine
from moving if rotary disc pull-type is not attached to
towing vehicle.
3.
Position jack under frame leg (B).
4.
Loosen wheel bolts slightly.
5.
Operate jack to raise wheel off ground.
6.
Place blocks or a stand under frame leg.
7.
Remove wheel bolts and remove wheel.
Installing Field Wheels
1011503
A
B
C
Figure 4.308: Installing Wheel Bolts
1.
Position wheel (A) on the spindle, install bolts (B), and
partially tighten.
IMPORTANT:
Be sure valve stem (C) points away from the wheel support.
