215333
250
Revision A
4.5.9
Driveline Guards
Removing Driveline Guards
WARNING
Do NOT operate the machine without the driveline guards in place and securely fastened.
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.
1015311
A
Figure 4.264: Driveline
2.
Remove driveline (A) from which the guard is going to be
removed. For instructions, refer to one of the following
procedures:
•
Removing Primary Driveline, page 226
•
Removing Hitch Driveline, page 229
•
Removing Clutch Driveline, page 237
1010784
A
B
Figure 4.265: Phillips Head Screws Installed in
Base Cone
3.
Remove three self-tapping Phillips head screws (A) from
base cone (B).
