215333
226
Revision A
4.5.4
Primary Driveline
1004040
Figure 4.208: Primary Driveline
The primary driveline transfers power from the tractor
’
s power
take-off (PTO) to the pull-type
’
s hitch swivel gearbox. Follow
regular lubrication procedures and ensure all driveline taper
pins are torqued as instructed. For instructions, refer to
Lubricating Cutterbar, page 146
Removing Primary Driveline
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.
2.
Unhook the rotary disc pull-type from the tractor. For instructions, refer to
3.8 Detaching Rotary Disc Pull-Type from
.
1008383
1008383
A
Figure 4.209: Driveline Shield Cone and Lever Clamp
3.
Release two lever clamps (A) using a screwdriver or similar
prying tool.
NOTE:
Only one lever clamp is shown in the illustration at right.
