215333
52
Revision A
3.8
Detaching Rotary Disc Pull-Type from Tractor
3.8.1
Detaching from Drawbar
CAUTION
•
To prevent accidental movement of the tractor, shut off the engine, engage the parking brake, and remove the key.
•
To maintain stability, always lower the machine completely. Block the rotary disc pull-type
’
s wheels before
detaching from tractor.
1.
Park the machine on a flat, level surface.
2.
Lower the pull-type onto blocks or leave it raised.
IMPORTANT:
If leaving the rotary disc pull-type in the raised position, close steering valve and both (left/right) lift cylinder lock-out
valves.
3.
Shut down the engine, and remove the key from the ignition.
4.
Move the remote cylinder control valve lever back and forth to relieve stored hydraulic pressure.
If the transport option is installed:
1023701
A
B
C
D
Figure 3.41: Remote Control
5.
Disconnect power wires (C) and (D) from remote
control (A).
6.
Roll up cable (B) and attach remote control (A) to the hitch
with the magnet on the back of the remote control box.