215333
196
Revision A
1027711
A
Figure 4.140: Cutterbar Doors and Curtains
16. Close cutterbar doors (A). For instructions, refer to
Closing Cutterbar Doors, page 38
Removing Small Non-Driven Drum
–
R116 PT
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
1.
Lower the rotary disc pull-type fully.
2.
Shut down the engine, and remove the key from the ignition.
1027711
A
Figure 4.141: Cutterbar Doors
3.
Open cutterbar doors (A). For instructions, refer to
.
