214657
38
Revision A
3.6
Daily Start-Up Check
Figure 3.20: Safety Equipment
CAUTION
•
Ensure combine and header are properly attached, all
controls are in neutral and combine brake is engaged.
•
Clear the area of other persons, pets, etc. Keep
children away from machinery. Walk around the
machine to make sure no one is under, on, or
close to it.
•
Wear close-fitting clothing and protective shoes with
slip-resistant soles.
•
Remove foreign objects from the machine and
surrounding area.
•
Carry with you any protective clothing and personal
safety devices that could be necessary through the
day. Don
’
t take chances. You may need a hard hat, protective glasses or goggles, heavy gloves, a
respirator or filter mask, or wet weather gear.
•
Protect against noise. Wear suitable hearing protection devices such as ear muffs or ear plugs to help
protect against objectionable or loud noises.
Perform the following checks each day before startup:
1.
Check the machine for leaks or any parts that are missing, broken, or not working correctly.
NOTE:
Use proper procedure when searching for pressurized fluid leaks. Refer to
5.9.5 Hydraulic Hoses and Lines,
2.
Clean all lights and reflective surfaces on the machine, and check lights for proper operation.
3.
Perform all daily maintenance. Refer to
Summary of Contents for PW8
