214657
5
Revision A
1.4
Maintenance Safety
Figure 1.8: Safety around Equipment
To ensure your safety while maintaining machine:
•
Review operator
’
s manual and all safety items before
operation and/or maintenance of machine.
•
Place all controls in Neutral, stop the engine, set the park
brake, remove the ignition key, and wait for all moving
parts to stop before servicing, adjusting, and/or repairing.
•
Follow good shop practices:
–
Keep service areas clean and dry
–
Be sure electrical outlets and tools are properly
grounded
–
Keep work area well lit
Figure 1.9: Equipment NOT Safe for Children
•
Relieve pressure from hydraulic circuits before servicing
and/or disconnecting machine.
•
Make sure all components are tight and that steel lines,
hoses, and couplings are in good condition before
applying pressure to hydraulic systems.
•
Keep hands, feet, clothing, and hair away from all
moving and/or rotating parts.
•
Clear area of bystanders, especially children, when
carrying out any maintenance, repairs, or adjustments.
•
Install transport lock or place safety stands under frame
before working under machine.
•
If more than one person is servicing machine at same
time, be aware that rotating a driveline or other
mechanically-driven component by hand (for example,
accessing a lubricant fitting) will cause drive components
in other areas (belts, pulleys, and knives) to move. Stay
clear of driven components at all times.
Figure 1.10: Safety Equipment
•
Wear protective gear when working on machine.
•
Wear heavy gloves when working on knife components.
Summary of Contents for PW8
