MAC215990
166
Revision A
ϭϬϯϴϮϱϰ
A
B
C
Figure 3.197: Crop Divider Latched to Header
11. Engage quick latch (A) onto the bolt.
12. Make sure the latch closes tightly and crop divider stop (B)
contacts header stop (C).
ϭϬϯϴϮϱϳ
A
B
E
C
D
Figure 3.198: Latch Adjustment
13. If the latch requires adjustment, loosen nut (A), and adjust
the length of bolt (B) until it takes 40
–
54 Nm (30
–
40 lbf
∙
ft)
of torque on hex shaft (C) to close the latch.
14. Retighten nut (A).
15. Attach multi-tool (D) onto hex shaft (C) and rotate the
multi-tool to lock the latch.
16. Install lynch pin (E) to secure the quick latch in place.
17. Repeat Step
to Step
at the
opposite end of the header to install the opposite crop
divider.
18. Close the endshield. For instructions, refer to
Closing Header Endshields, page 40
19. Check the float. For instructions, refer to
