MacDon M2170NT, Operator'S Manual

Page: 387 / 558

262171
367
Revision A
6.13 Every 2000 Hours
Complete the following maintenance tasks every 2000 hours of operation.
•
Change the engine coolant. For instructions, refer to 6.13.1 Changing Engine Coolant, page 367 .
•
Change the hydraulic oil. For instructions, refer to 6.13.2 Draining Hydraulic Oil, page 369 .
•
Change the DEF tank vent hose filter. For instructions, refer to 6.13.4 Replacing Diesel Exhaust Fluid Vent Hose Filter,
page 371 .
•
General engine inspection. For instructions, refer to 6.13.5 General Engine Inspection, page 372 .
6.13.1 Changing Engine Coolant
Change the engine coolant after every 2000 hours of operation or two years, whichever occurs first.
Draining Coolant System
Coolant is cycled through the engine to help reduce internal heat.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
CAUTION
To avoid personal injury from hot coolant, do NOT turn the pressurized coolant tank cap until the engine cools.
NOTE:
Properly dispose of the water/coolant mixtures that are drained from the cooling system.
1. Shut down the engine, and remove the key from the ignition.
2. Let the engine cool.
3. Open the hood. For instructions, refer to 6.3.1 Opening Hood, page 287 .
1015743
A
Figure 6.131: Coolant Recovery Tank
4. Turn pressurized coolant tank cap (A) to the first notch to
relieve pressure before removing the cap completely.
5. Remove the pressurized coolant tank cap.
MAINTENANCE AND SERVICING