215104
82
Revision A
1000074
Figure 3.109: Hydraulic Oil Levels
3.
Ensure hydraulic oil level is between the low (L) and
high (H) marks.
4.
If necessary, add oil to maintain a level between the low (L)
and high (H) marks. Refer to Table
for
specifications.
5.
Reinstall the dipstick and filler cap, and turn clockwise to
tighten and lock.
3.19.6
Checking Fuel Separator
1008750
A
Figure 3.110: Fuel Filter
1.
Place a container under filter drain valve (A).
2.
Turn drain valve (A) by hand 1 1/2 to 2 turns
counterclockwise until fuel begins draining.
3.
Drain the filter sump of water and sediment until clear fuel
is visible. Clean as necessary.
4.
Turn drain valve (A) by hand 1 1/2 to 2 turns clockwise
until tight.
5.
Dispose of fluid in a safe manner.
3.19.7
Checking Engine Oil Level
1007683
A
Figure 3.111: Engine Oil Level
1.
Remove dipstick (A) by turning it counterclockwise to
unlock.
2.
Wipe the dipstick clean and reinsert it into the engine.
3.
Remove the dipstick again and check the oil level.
