215676
49
Revision A
3.7.3
Engine-Forward Lighting
This section explains the lighting defaults with the windrower in engine-forward mode.
Table 3.2 Engine-Forward Lighting
Auto Road Inactive
Auto Road Active
7
Switch Position
⇨⇨
Lights
⇓
Field
Road
Field
Road
Field (A)
ON
ON
ON
ON
Tail (B)
ON
8
ON
Hazard/turn signal (C)
CDM switched
CDM switched
CDM switched
CDM switched
Tail (D)
(cab-forward only)
OFF
OFF
OFF
OFF
Tail on header
(not shown)
ON
ON
ON
ON
Road (E)
ON in high or
low beam
ON in high or
low beam
ON in high or
low beam
ON in high or
low beam
Beacon (F)
ON or OFF
ON or OFF
ON
ON
1022478
B
B
C
C
F
F
1022474
F
F
C
C
A
E
D
D
1030123
1
2
Figure 3.20: Engine-Foward Lighting
1 - Front
2 - Rear
A - Field (Qty 2)
B - Tail (Qty 2)
C - Hazard/Turn Signals (Qty 2)
D - Tail (Qty 2)
E - Road (Qty 2)
F - Beacons (Qty 2)
7.
These lights are active when the engine is running, the transmission is in mid-range, and the header is disengaged.
8.
This light is only on when the beacon switch is set to ON.
