215676
412
Revision A
1000898
A
A
B
Figure 5.171: Ambient Light Fixture
2.
Pressing on flexible tabs (A) with a screwdriver, pull the
ambient light fixture out of the cab headliner.
3.
Remove the wires from connectors (B).
4.
Retrieve the new ambient light fixture. Attach the wire
connectors to the new light fixture.
5.
Push the new light fixture into the slot in the cab roof, until
the flexible tabs hold the fixture in place.
5.10.14
Turn Signal Indicators
The turn signal indicator lights can be found on the operator
’
s console. If the turn signal indicators are not working
correctly, contact your MacDon Dealer for more information.
5.10.15
Circuit Breakers and Fuses
The circuit breakers and fuses are located inside a fuse box mounted on the right cab-forward side of the frame under the
platform.
Accessing Main Fuse Box
The main fuse box can be found on the windrower
’
s frame, under the right cab-forward platform.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat for any reason.
1.
Stop the engine, and remove the key from the ignition.
2.
Move the right (cab-forward) platform aftward. For instructions, refer to
1000901
A
B
Figure 5.172: Fuse Box
3.
Remove wing nut (A). Remove fuse box cover (B).
4.
A cover may be installed over the circuit breaker. Remove it
to access the breaker.
