MacDon M155 2022, Operator'S Manual

Page: 332 / 526

215676
312
Revision A
ü
Check walking beam width adjustment bolts
torque. For instructions, refer to
4.3.7 Adjusting
Caster Tread Width, page 174 .
First 10 Hours 31
ü
Check walking beam width adjustment bolts
torque. For instructions, refer to
4.3.7 Adjusting
Caster Tread Width, page 174 .
ü
Check neutral adjustment 32 .
Every 10 Hours or Daily 31
®
Clean A/C condenser 33 . For instructions, refer to
Cleaning Cooler Box Components, page 376 .
®
Clean charge air cooler. For instructions, refer to
Cleaning Cooler Box Components, page 376 .
ü
Check engine oil level 33 . For instructions, refer
to Checking Engine Oil Level, page 344 .
ü
Check engine coolant level. For instructions,
refer to
33
Checking Coolant Level, page 368 .
ü
Add fuel to fuel tank 33 . For instructions, refer to
Filling Fuel Tank, page 163 .
ü
Check fuel filter water trap 33 . For instructions,
refer to Removing Water from Fuel System,
page 365 .
®
Clean hydraulic oil cooler 33 . For instructions,
refer to 5.11.2 Hydraulic Oil Cooler, page 420 .
ü
Check hydraulic oil level
33
. For instructions, refer
to 5.11.1 Checking and Filling Hydraulic Oil, page
419 .
®
Clean radiator 33 . For instructions, refer to
Maintaining Engine Cooling Box, page 373 .
ü
Check tire inflation pressure
33
. For instructions,
refer to Inflating Drive Wheel Tire, page 430 .
First 50 Hours
34
ü
Inspect hose clamps: intake/radiator/heater/
hydraulic
35 . Refer to specific hose clamp section
for instructions.
ü
Check walking beam, with adjustment bolts. For
instructions, refer to
4.3.7 Adjusting Caster Tread
Width, page 174 .
ü
Check caster wheel anti-shimmy dampener bolts
(if installed). For instructions, refer to
Tightening
Caster Wheel Anti-Shimmy Dampeners, page
443
.
MAINTENANCE AND SERVICING
31. Begins from the first use of the machine.
32. Dealer-adjusted.
33. Records of daily maintenance are not required for warranty purposes. However, these records can be maintained, if
desired.
34. Begins from first use of machine.
35. Hand-tighten these clamps unless otherwise noted.