215627
112
Revision A
$
Figure 5.96: Header Float Springs
7.
If you are lowering the header lift legs WITH a header or
weight box attached to the windrower
, proceed to Step
.
If you are lowering the header lift legs WITHOUT a header
or weight box attached to the windrower
, fully release the
tension in header float springs (A):
•
If you are prompted by the Harvest Performance
Tracker (HPT) to remove the float, then remove the
float and proceed to Step
.
IMPORTANT:
When you are lowering the header lift legs without a
header or a weight box attached to the windrower, ensure
that the tension on the float springs is fully released in
order to prevent damage to the header lift linkages.
$
%
Figure 5.97: HPT Display
8.
Press rotary scroll knob (A) on the Harvest Performance
Tracker (HPT) to highlight the QuickMenu options.
9.
Rotate scroll knob (A) to highlight HEADER FLOAT
symbol (B), and press the scroll knob to select it. The Float
Adjust page appears.
$
Figure 5.98: HPT Display
10. Press soft key 3 (A) to remove the header float.
NOTE:
If the header float is active, the icon at soft key 3 displays
Remove Float; if the header float has been removed, then
the icon displays Resume Float.