![background image](http://html.mh-extra.com/html/macdon/m1240/m1240_operators-manual_685727224.webp)
3. Turn knob to scroll to the KNIFE setting (A) on the
QuickMenu page, and press knob to select it.
Figure 4.228: Draper Header QuickMenu
4. Scroll to and select the KNIFE SPEED ALARM
setting (A).
5. Turn scroll knob to adjust knife speed alarm as desired.
Default is 70% and minimum value is 50%.
For
example, at a setting of 75%, an alarm will sound
when knife speed decreases to 75% of preset knife
speed due to overload.
Figure 4.229: Adjusting Knife Speed Alarm
4.6.8 Deck Shift Control
When connected to a draper header with the deck shift option, hydraulic deck shift control allows you to select the
deck position and draper rotation of the header from the operator’s station. Deck shift allows you to select crop
delivery from the left side, center, or right side of the header.
Deck Shift
CAUTION
Check to be sure all bystanders have cleared the area.
Shift decks as follows:
1. Engage header by pushing and holding the HEADER
ENGAGE switch (A), and pulling up on collar (B).
Figure 4.230: Header Engage Switch
214053
212
Revision A
Summary of Contents for M1240
