Ongoing Maintenance Intervals
Time
Service
Every
10 hours or
daily
Check re in
fl
a on.
Check engine oil level.
Check engine coolant level at reserve tank.
Check hydraulic oil level.
Drain fuel
fi
lter water trap.
Fill fuel tank.
Check hydraulic hoses and lines for leaks.
Check diesel exhaust
fl
uid (DEF) level.
Every
50 hours
Grease caster pivots (x2).
Grease top li link pivots (x4).
Grease caster wheel bearings.
Clean cab fresh air intake
fi
lter.
Check gearbox oil level.
Every 100
hours or
annually
Clean cab air return
fi
lter.
Clean radiator, hydraulic oil cooler, charge air cool-
er, and A/C condenser.
Every 250
hours
Change engine oil and
fi
lter.
Change engine gearbox oil.
Change air cleaner primary
fi
lter.
Check wheel drive oil level.
NOTE:
Refer to M1170 Operator’s Manual for service beyond
250 hours.
Break-In Inspec ons
Hr(s)
Item
Check
1
Drive wheel nuts
Torque: 510 Nm (375 lbf· ) dry
Refer to M1170 Operator’s Manual.
5
A/C compressor belt
Tension
Caster wheel nuts
Torque: 170 Nm (125 lbf· )
Caster wheel an -shimmy
dampener bolts
Torque bolts:
Inboard (x2): 135 Nm (100 lbf· )
Outboard: 244 Nm (180 lbf· )
Outboard jam nut: 135 Nm (100 lbf· )
Walking beam width
adjustment bolts
Torque: 759 Nm (560 lbf· )
10
Walking beam width
adjustment bolts
50
Hose clamps: air intake,
radiator, heater and
hydraulic
Hand- ghten unless otherwise noted.
Walking beam width
adjustment bolts
Torque: 759 Nm (560 lbf· )
Caster wheel an -shimmy
dampener bolts
Torque bolts to the same speci
fi
ca on
as 5 hour check.
Main gearbox oil
Change
Drive wheel oil lubricant
Hydraulic return
fi
lter
Hydraulic charge
fi
lter
Torque: 759 Nm (560 lbf· )
Tire Pressures
The recommended re pressure will vary depending on header type
and a achments installed. Refer to your M1170 Operator’s Manual
for a complete list of recommended re pressures.
M1170 Maintenance and Servicing
Subject to change without no ce
Harvest Performance Tracker (HPT) Menu Structure
M1170 Windrower Quick Card - Form 214522 Rev. B
Supplement to M1170 Windrower Operator’s Manual
Fluids and Lubricants
Fluid
Capacity
Spec
Descrip on
/
Informa on
Diesel
exhaust
fl
uid
(DEF)
28 L
(7.5 US Gallons)
Must meet
ISO 22241
requirements
Diesel exhaust
system
Fuel:
diesel No.2
518 L
(137 US Gallons)
ASTM
D-975
Grade S15
Sulphur (by weight)
0.5% max.
water and sediment
(by vol) 0.05% max.
lubricity 520 microns
Fuel: diesel
no.1 and no. 2
mix
518 L
(137 US Gallons)
n/a
Sulphur (by weight)
0.5% pref. 1% max. water
and sediment (by weight)
0.1% max. lubricity 460
microns
Engine
coolant
30 L
(7.9 US Gallons)
ASTM D-6120 and
Fleetguard ES Com-
pleat
®
Refer to M1170
Operator’s Manual
Standard: 1.4 L
(1.5 US Quarts)
SAE 75W-140 (or 80W
-140) API service class
GL-5
Fully synthe c gear lubri-
cant (SAE J2360 preferred)
High Torque: 4.5 L
(4.8 US Quarts)
SAE 85W-140, API
service class GL-5
Grease
As required
SAE
mul -purpose
High temperature extreme
pressure EP2. max 1%
molybdenum disulphide,
lithium base unless
otherwise noted
Engine oil
11 L
(11.6 US Quarts)
SAE 15W-40 for API
class SJ and CJ-4
Engine oil pan
Hydraulic oil
60 L
(15.8 US Gallons)
Hydraulic
transmission oil Refer
to operator’s manual
Windrower drive and head-
er drive
Gearbox oil
2.1 L
(2.2 US Quarts)
SAE 75W-140 (or 80W
-140) API service class
GL-5
(SAE J2360
preferred)
Fully synthe c gear lubri-
cant for
engine gearbox
A/C
refrigerant
2.27 kg (5 lb.)
R134A
Cab A/C system
A/C
compressor
oil
240 cc
(8.1
fl
. oz)
SP-15
PAG
Cab A/C compressor lubri-
cant
Wheel Drive
lubricant
QuickMenu Features
•
Adjust
fl
oat
•
Set knife speed
•
Access maintenance informa on
•
Adjust Eco Engine Control (EEC) speed
•
Adjust auto speed se ngs
•
Manage telltales
•
Set maximum ground speed
•
De
fi
ne header alarm speeds
•
Turn auto speeds ON/OFF
•
Set header alarm pressure
Informa on:
Contains informa on about the windrower, header, and
performance data.
Se ngs
:
Provides access to adjustable se ngs for the display,
windrower, header, and One-Touch-Return.
Maintenance
:
Contains the maintenance scheduler. Turn ON/OFF
individual maintenance no
fi
ca ons and log your
maintenance history.
Diagnos cs
:
Provides access to diagnos c informa on, engine
faults, and windrower faults.
Engine
A ertreatment:
Provides access to the selec ve cataly c reduc on (SCR)
catalyst condi oning MANUAL (FORCE) and INHIBIT
switches.
Pressing the encoder knob (A) (or the SELECT bu on on the GSL) opens the QuickMenu on the HPT display. The QuickMenu is the main way to adjust
on-screen values. Adjustable parameters are highlighted by a white border (B). The curser posi on is highlighted with a red border (C). Use the
encoder knob to move the red curser to the desired area. Press SELECT to access the adjustment (D). Once the parameter is selected, use the scroll
wheel to change the value. Press BACK or HOME to save the adjustment.
QuickMenu
