MacDon HC10, Operation And Parts Manual

Page: 83 / 156

OPERATION
4.9.5 Forming Shields
The position of the forming shields controls the width and placement of the windrow. The decision on forming shield
position (settings between 915 and 2346 mm [36 and 92 in.]) should be based on the following factors:
• Weather conditions (rain, sun, humidity, wind)
• Type and yield of crop
• Drying time available
• Method of processing (bales, silage, green-feed)
A wider windrow will generally dry faster and more evenly, resulting in less protein loss. Fast drying is especially
important in areas where the weather allows only a few days to cut and bale.
Where weather conditions permit or when drying is not critical, for example, when cutting for silage or green-feed,
a narrower windrow may be preferred for ease of pick-up.
214033
73
Revision A