MacDon HC10, Operation And Parts Manual

Page: 41 / 156

UNLOADING AND ASSEMBLY
3.7 Attaching Hydraulics
The procedure for attaching hydraulics is different for 15-foot draper headers.
• If attaching a 15-foot header, refer to 3.7.1 Attaching Hydraulics: 15-Foot Headers, page 31 .
• When attaching any other size header, refer to 3.7.2 Attaching Hydraulics: All Headers Except 15-Foot, page 33 .
3.7.1 Attaching Hydraulics: 15-Foot Headers
To attach hydraulics to a 15-foot draper header, follow
these steps:
1. Disconnect return hose (A) at elbow on motor.
Figure 3.38: Return Hose
2. Install check valve tee (A) on elbow and reconnect
return hose (B) to tee (A).
3. Connect feed draper return line (C) from the
conditioner hose package onto the check valve.
Figure 3.39: Check Valve and Hoses
214033
31
Revision A