MacDon HC10, Operation And Parts Manual

Page: 129 / 156

REPAIR PARTS
Ref
Part
Number Description Qty
Serial
Number
1 159432 PAN – FINGER FEED WELDT 1
2 159399 FRAME, FEED DECK – WELDT 1
3 133838 ROLLER – DRIVE 4 IN., WELDT 1
4 49306 FLANGE 1
5 21859 BEARING – SPH O.D. EXT INNER RACE 1-3/16 BORE 1
6 30661 FLANGE 1
159197 MOTOR – HYD 4.0 CID (WITH 921 PSI RELIEF) 1
37181 SEAL KIT – FOR MOTOR MD #159197
7
159606 VALVE – RELIEF, 921 PSI
8 159183 HOLDER – COUPLING 1
9 103738 CLAMP – PVC INSULATED 13/16 IN. TUBE SIZE 1
10 21801 FITTING – ELBOW 90° HYD 1
11 130998
HOSE
1
12 30314
FITTING – ELBOW 90° HYD
1
135213 COUPLING – FEMALE HYD 3/8 FLAT FACE BULKHEAD 1 13
135481 SEAL KIT – FOR 3/8 FEMALE COUPLER
14 21881 FITTING – ADAPTER HYD 1
15 159422 HOSE 1
16 30819 FTG – 1/2 IN. HYD UNION 1
17 44209 O-RING 1
135386 COUPLER – MALE HYD 3/8 IN. FLAT FACE 1 18
111978 SEAL KIT – FOR 3/8 MALE COUPLER
19 159256 SHAFT – IDLER ROLLER 1
20 133124 HOUSING ASSY – RH IDLER CUP 17 1
21 133126 HOUSING ASSY – LH IDLER CUP 17 1
22 100862 SEAL – OIL 4
23 118185 BEARING – BALL CYL, 52MM O.D., 25MM I.D. 2
24 118011 RING – RETAINING, INTERNAL 2
25 133372 CAP, DUST 2
26 21010 FTG – LUBE 90 DEG 1/4-28 TAPER THD 2
27 159383 SUPPORT WELDT – LH 1
28 159385
SUPPORT WELDT – RH
1
29 159260
GUIDE – LH
1
17. Includes oil seal (MD #100862), bearing (MD #118185), and retaining ring (MD #118011).
214033
119
Revision A