![background image](http://html.mh-extra.com/html/macdon/flexdraper-fd1-series/flexdraper-fd1-series_operators-manual_685695446.webp)
1. Shut down the combine, and remove the key from
the ignition.
2. Remove the drive cover. Refer to
.
3. Loosen six nuts (A). Slide the motor (B) and motor
mount (C) down towards the reel shaft.
Figure 5.257: Reel Drive (Parts Removed for
Clarity)
Tightening Reel Drive Chain
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator’s seat for any reason.
1. Shut down the combine, and remove the key from
the ignition.
2. Ensure the six bolts (A) securing the motor mount to
the chain case are loose.
Figure 5.258: Single-Reel Drive Shown – Double
Reel Similar
147831
428
Revision A
Summary of Contents for FlexDraper FD1 Series
