214323
443
Revision B
1001577
A
X
Figure 6.187: Feed Deflector
–
End View
2.
Measure gap (X) between existing feed deflector (A) and
the forward edge of the pan.
1001578
A
B
Figure 6.188: Feed Deflector
3.
Remove the two bolts and nuts (B) securing feed
deflector (A) to the adapter frame, and remove the feed
deflector.
4.
Position replacement feed deflector (A), and secure with
bolts and nuts (B) (ensure the nuts are facing the combine).
Maintain the original gap, measured in Step
between the feed deflector and the forward edge of
the pan.
5.
Repeat for the opposite deflector.
6.
Attach the header to the combine. Refer to
Attachment/Detachment, page 289
.
7.
Extend the center-link fully, and check the gap between
feed deflector (A) and the pan. Maintain a 19
–
25 mm (3/4
–
1 in.) gap.
Summary of Contents for FD75
