![background image](http://html2.mh-extra.com/html/macdon/d1x-series/d1x-series_unloading-and-assembly-instructions_3273904070.webp)
214778
64
Revision A
5.9
Leveling the Header
The windrower linkages are factory-set to provide the proper level for the header and should not normally require
adjustment.
1.
If the header is not level, check the pressure of the windrower
’
s tires to ensure they are properly inflated (refer to
your windrower operator
’
s manual).
2.
If the header is still not level, adjust the windrower linkages as required (refer to the appropriate section in the
windrower operator
’
s manual).
NOTE:
The float springs are
NOT
used to level the header.