214778
22
Revision A
3.2
Attaching Draper Header Supports
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Retrieve header draper supports removed from shipping supports in Step
1015587
A
B
Figure 3.13: Draper Header Support
2.
Remove hairpin and clevis pin (B) from the draper header
support (A).
1015593
A
B
C
D
Figure 3.14: Draper Header Support
3.
Position the draper header support (B) on lift linkage (A),
and reinstall clevis pin (C).
NOTE:
To avoid pin snagging the windrow, install the clevis pin on
the outboard side of the draper header support.
4.
Secure clevis pin (C) with hairpin (D).
5.
Repeat for opposite lift linkage.