![background image](http://html2.mh-extra.com/html/macdon/d1x-series/d1x-series_unloading-and-assembly-instructions_3273904019.webp)
214778
13
Revision A
2.3
Removing Shipping Supports
NOTE:
Unless otherwise specified, discard all shipping materials and hardware.
1016847
A
Figure 2.12: Draper Header Supports and Shipping
Supports
1.
Cut straps and remove draper header supports (A) from
shipping support. Set draper header supports aside for
installation.
1008913
A
Figure 2.13: Single Reel
2.
Single reel only:
Cut banding (A) securing reel to cutterbar
and backtube.
1016591
A
B
Figure 2.14: Upper Support
3.
Remove four bolts (A) securing upper support (B) to header
legs and remove support.