3. Approach one of the headers and slide forks (A)
underneath the shipping support (B) as far as
possible without contacting the shipping support of
second header (C).
IMPORTANT:
Avoid lifting the second header and ensure the forks
do not interfere with the shipping frame. If the forks
contact the second header, damage to the headers
may occur.
4. Remove hauler’s tie-down straps,
chains,
and
wooden blocks.
5. Slowly raise header off trailer deck.
WARNING
Be sure forks are secure before moving away from
load. Stand clear when lifting.
6. Back up until header clears trailer and slowly lower to
150 mm (6 in.) from ground.
Figure 2.2: Header Shipping Supports
7. Take header to the storage or setup area. Ensure
ground is
fl
at and free of rocks or debris that could
damage the header.
8. Repeat above steps for second header.
9. Check for shipping damage and missing parts.
214047
6
Revision A
