MacDon A40-D, Operator'S Manual

Page: 5 / 240

Introduction
This manual describes the operating and maintenance procedures for MacDon model A40D and A40DX Self-
Propelled Windrower Auger Headers, including a Grass Seed version.
An A40D auger header is factory-configured to connect to an M Series Self-Propelled Windrower, while an A40DX
auger header is factory-configured to connect to an M1 Series Windrower.
NOTE:
A40D auger header grass seed (GSS) version can be used on an M1 Series Windrower ONLY if conversion kit
MD #B5998 and MD #318022 have been installed on the auger header. This kit is optional when converting the
A40D for use on M1 Series windrowers.
Model Description Configuration Knife Size m (ft.) Features
A40D,
A40DX
Auger header
with conditioner
Self-propelled
only
Double
4.3, 4.9, and 5.5
(14, 16, and 18)
Separate hydraulic
auger, knife, and
reel drives,
grass seed option
When setting up the machine or making adjustments, review and follow the recommended machine settings in all
relevant MacDon publications. Failure to do so may compromise machine function and machine life and may result
in a hazardous situation.
Use this manual as your first source of information about the machine. Use the Table of Contents and the Index to
guide you to specific topics. Study the Table of Contents to familiarize yourself with how the information is
organized. If you follow the instructions provided here, your header will work well for many years.
Keep this manual handy for frequent reference, and to pass on to new Operators or Owners. Contact your Dealer if
you need assistance, information, or additional copies of this manual.
CAREFULLY READ THE INFORMATION PROVIDED IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE
OR MAINTAIN AN A40D OR A40DX AUGER HEADER.
MacDon provides warranty for Customers who operate and maintain their equipment as described in this manual.
A copy of the MacDon Industries Limited Warranty Policy, which explains this warranty, should have been provided
to you by your Dealer. Damage resulting from any of the following conditions will void the warranty:
•
Accident
•
Misuse
•
Abuse
•
Improper maintenance or neglect
•
Abnormal or extraordinary use of the machine
•
Failure to use the machine, equipment, component, or part in accordance with the manufacturer
’
s instructions
Conventions
The following conventions are used in this document:
•
Right and left are determined from the operator
’
s position. The front of the header is the side that faces the crop;
the back of the header is the side that connects to the windrower.
214804
iii
Revision A