background image

Prime Owners Manual

V1.00

Copyright Mac Developments Pty. Ltd. 2017

All rights reserved

No part of this document may be copied or reproduced in any form or by any means without the prior written 

consent of Mac Developments Pty. Ltd.

Notice is hereby given that this manual is part of the article owned in whole by Mac Developments Pty. Ltd., known 

as indicated in this manual and drawings. All rights of manufacture and reproduction of such articles or any part 

thereof are reserved by Mac Developments Pty Ltd. Neither said article nor any part thereof may be manufactured or 

reproduced without the written authorization from Mac Developments Pty. Ltd. All proprietary rights and information 

are the sole property of Mac Developments Pty. Ltd.

MacDev, Prime, Conquest, Gladiator, MatchStick, Cyborg, Shift and Drone are all trademarks of Mac Developments 

Pty Ltd. 

Statement of Liability

Mac Developments Pty. Ltd. makes no warranties with respect to this documentation and disclaims any implied 

warranties of merchantability or fitness for a particular purpose. The information in this document is subject to 

change without notice. Mac Developments Pty. Ltd. assumes no responsibility for its resale or safe handling. Mac 

Developments Pty. Ltd. assumes no responsibility for physical injury or property damage resulting from its use.

MacDev Warranty

MacDev offers a 12 month limited warranty period on your MacDev manufactured electro-pneumatic 

marker.  The  MacDev  electro-pneumatic  marker  is  warranted  to  be  free  from  all  manufacturing  and 

production defects for a period of 12 months from the date of original purchase. If requested by MacDev, 

an original proof of purchase must be provided. Warranty exceptions include, but are not limited to, 

accidental damage, misadventure, reasonable wear and tear and consumable components such as 

O-rings, detents, batteries and eyes. Warranty work must be undertaken by an authorized MacDev Tech 

Centre or at a MacDev sanctioned Tech Support booth.

For assistance with your warranty, please visit www.macdevpaintball.com/warranty or contact customer 

service on our website (www.macdevpaintball.com)

Warning!

This is not a toy. Misuse may cause serious injury or death. Eye protection designed specifically 

for paintball must be worn by user and persons within range. Recommend 18 years or older 

to purchase. Persons under 18 must have adult supervision. 

READ OWNER’S MANUAL BEFORE USING.

 2

Summary of Contents for PRIME













Reviews: