macc SPECIAL 380 A, Instruction Manual For Operation

Page: 15 / 63

10. INFORMATION REGARDING ENVIRONMENTAL NOISE
An environmental noise test carried out on the SPECIAL 380 A band saw machine , identical to the machine to
which these operation instructions refer, has given the following results:
ACOUSTIC RADIATION PRESSURE
1.
LAeq = 76,7 dB (A)
2. Lpeak = 82,7 dB (the maximum acceptable value is 140 dB).
3. The level of background noise has no influence = 48.5-54,2 dB (A)
The considerable data are the result of tests made under the D.lgs. 277/1991 in the implementation of the directives nr.
80/1107/CEE, nr. 82/605/CEE, nr.84/477/CEE,and 88/642/CEE.
11. LAYING OFF AND DISMANTLING
11.1 LAYING OFF
If the machine is to be laid off or left idle for a long period, the following operations must be carried out:
1. Disconnect the machine from the electricity mains.
2. Empty oil from the gear box and cooling liquid from its tank
3. Clean carefully the machine by getting rid of all traces of grease, especially on the worked parts that must be
protected with anti-oxidants.
4. Cover the machine with a sheet, preferably not plastic as it can cause rust due to the humidity condensation.
5. Store the machine in a closed, dust-free place.
11.2 DISMANTLING
If the machine must be definitively dismantled, its components must be sub-divided for the purpose of a possible recycle
of the materials and for the environment safety. The following table is given for your guidance:
Steel Electrical
Components
Light
alloy
Cast iron Bronze
Copper
Plastic and
rubber
Various
Shaft Motors winding Gear
boxes Structural
parts Bushings Seals
Rollers Push button and Control system
(relais-transformer) Cy Cylinders Cable chain
Base Electronic panel
Spring
Lo smaltimento degli oli usati deve essere eseguito nel rispetto delle Direttive 75\439\CEE e 87\101\CEE
Lo smaltimento dei componenti elettrici è previsto secondo le Direttive europee 2002/95/CEE e 2002/96/CEE.
7