background image

© Copyright 2005

This manual is furnished under license and may be used or copied only in accordance with the
terms of such license.

Except as permitted by such license, no part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or oth-
erwise, including translation to another language or format, without the prior written permission of
Part.

The content of this manual is furnished for informational use only, is subject to change without
Notice, and should not be construed as a commitment by Part2 Research Inc,. Part2 Research Inc,.
assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.

FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) this device may not cause harmful interference and (2) this device must accept any inter-
ference received, including interference that may cause undesired operation.

Operation of this equipment in a residential area is likely to cause interference in which case the
user at his or her own risk and expense will be required to correct the interference.

Declaration of Conformity
Part2 Research declares that the PHR-250CE conforms to the following standards, in accordance
with the provisions of the EC Directive 89/366/EEC: EN 55022 (CISPR 22:1985), Class A.

Warranty
Part2 Research Inc,. warrants that this product will be free from defects in title, materials and manu-
facturing workmanship for one year from the date of the purchase. If the product is found to be
defective then, as your sole remedy and as the manufacturer’s only obligation, Part2 research will
repair or replace the product.

This warranty is exclusive and is limited to PHR-250CC. This warranty shall not apply to products
that have been subjected to abuse, misuse, abnormal electrical or environmental conditions, or any
condition other than what can be considered normal use.

Warranty Disclaimers
Part2 Research Inc,.  makes no other warranties, express, implied or otherwise, regarding the PHR-
250CC, and specifically disclaims any warranty for merchantability or fitness for a particular purpose.

The exclusion of implied warranties is not permitted in some states and the exclusions specified
herein may not apply to you. This warranty provides you with specific legal rights. There may be
other rights that you have which vary from state to state.

Limitation of Liability
The liability of Part2 Research Inc,. arising from this warranty and sale shall be limited to a refund of
the purchase price. In no event shall Part2 research be liable for costs of procurement of substitute
products or services, or for any lost profits, or for any consequential, incidental, direct or indirect
damages, however caused and on any theory of liability, arising from this warranty and sale. These
limitations shall apply not with standing any failure of essential purpose of any limited remedy.

Mace Group Inc./ Macally Peripherals

6401E. Airport Drive, Ontario, CA 91761
Tel: 909.230.6888

Fax: 909.230.6889

http://www.macally.com
e-mail: [email protected]

Summary of Contents for PHR-250CE























Reviews: