1. Attach the holder to the vent mount by placing
holder on top of the base and sliding it downward
until it clicks and locks.
3. Insert the clamp into the air vent and tighten it
securely into place by turning the screw handle
clockwise.
4. Press the support stand release buttons and
swivel the stand until it sits on the surface of your
vehicle to support the mount.
6. Press the holder grip and foot support release
buttons on the back of the cradle to expand the
arms and pull down the foot support.
7. Place your smartphone in the holder and align
the center of your smartphone with the triangle
marks on the grips for best Qi charging efficieny.
8. Push the foot support upward until the bottom of
your smartphone rests on it. Press both holder
grips inward until they hold the smartphone firmly.
Your smartphone will automatically start to charge.
5. Connect the USB-C end of the charging cable to
the cradle and the other end into the USB-A port of
your car or USB car charger (included, red USB-A
port).
2. Find a visible and reachable location on any of
your cars air vents to attach the phone holder.
How to use the MVENTQI
2
②
①