background image

17

Q2. How should I disconnect G-S350SUAB2 safely from the computer? 
After I disconnect the SATA enclosure, why does the drive icon still 
stay on the desktop of MacOS X?

A2: For Firewire or USB connection in Windows PC, please click “Safely 
remove mass storage device - Drive letter” line inside Safely Remove 
Hardware icon on the System Tray; In Mac computer, please trash the 
external drive icon. Then disconnect G-S350SUAB2 from the system.

In SATA connection, depending on the SATA host controller(and 
sometimes OS) you use, some controllers support hot plug and unplug 
function, some don't. You have to find out its capability. To prevent data 
corruption, the safest way to disconnect SATA cable or power off G-
S350SUAB2 is to shut down computer first. 

SATA drive (or SATA connection) is not treated essentially as removable
device to the most of systems if not all. That is why there is no eject icon
associated to SATA drive in Finder of Mac OS X, and System Tray in
Windows has no Remove Hardware option for SATA drive. Therefore, 
when the SATA drive is connected, some system still keeps SATA drive 
icon, you just won't be able to use the drive until you connect it back.

Summary of Contents for G-S350SUAB2



















Reviews: