29
MCS2400
by MacAllister
In
more
detail...
GB
IE
Care and maintenance
UK plug
Power cord
If the power cord is damaged, it must be replaced by the
>
manufacturer, its service agent or similarly qualified persons in
order to avoid a safety hazard.
If you need to replace the fitted plug, then follow the instructions
below. IMPORTANT: The wires in the mains lead are coloured in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colours of the wire in the mains lead of this product may not
correspond with the coloured marking identifying the terminals in
your plug, proceed as follows. The wire, which is coloured blue, must
be connected to the terminal, which is marked with N or coloured
black. The wire, which is coloured brown, must be connected to the
terminal, which is marked L or coloured red.
Only fit an approved 13 Amp BS 1363 or BS 1363/A plug and the
correctly rated fuse.
If in doubt, consult a qualified electrician.
WARNING!
Never connect live or neutral wires to the
earth terminal of the plug.
13AMP fuse
approved to
BS 1362
Brown L(Live)
Cable grip
Outer sleeve
firmly clamped
Connect
Blue to
N(Neutral)
NOTE:
If a moulded plug is fitted and has to be removed
take great care in disposing of the plug and severed cable,
it must be destroyed to prevent engaging into a socket.
MNL_MCS2400_DFT_GB_V05_111108.indd 29
11/8/11 5:17:40 PM
