background image

Your chain saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and 
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: 

To reduce the risk of injury, the user must read and understand the operator’s manual before using 

this product. 

Thank you for buying a Ryobi product.

Cette scie à chaîne a été conçue et fabriquée conformément aux 
strictes normes de fiabilité, simplicité d’emploi et sécurité d’utilisation 
de Ryobi. Correctement entretenue, elle vous donnera des années 
de fonctionnement robuste et sans problème.

AVERTISSEMENT :

 

Pour réduire les risques de 

blessures, l’utilisateur doit lire et veiller à bien comprendre le 
manuel d’utilisation avant d’employer ce produit. 

Merci d’avoir acheté un produit 

Ryobi

.

Su motosierra ha sido diseñada y fabricada de conformidad con las 
estrictas normas de Ryobi para brindar fiabilidad, facilidad de uso 
y seguridad para el operador. Con el debido cuidado, le brindará 
muchos años de sólido y eficiente funcionamiento.

ADVERTENCIA: 

Para reducir el riesgo de lesiones, 

el usuario debe leer y comprender el manual del operador antes 
de usar este producto. 

Le agradecemos la compra de un producto 

Ryobi

.

OPERATOR’S MANUAL

 

 

 

RY10520 / 20 in. 46cc Chain Saw

   

         

 

 

 

 

   

 

 

 

   

RY10518 / 18 in. 46cc Chain Saw

   

         

 

 

 

 

   

 

 

 

   

(ALL VERSIONS)

 

 

 

 

ENGINE/EVAP. FAMILY: *HCPS.0464AC

 

 

   

 

 

 

CONSERVER CE MANUEL POUR 

FUTURE RÉFÉRENCE

GUARDE ESTE MANUAL PARA 

 FUTURAS  CONSULTAS

SAVE THIS MANUAL FOR FUTURE REFERENCE

Summary of Contents for RY10518










































Reviews: