MANUAL
DT-2200
53
Programming unit
Programming is done using the Menu-Enter-Up-Down-Left-Right buttons in conjunction with
the display or the TV screen. Program the QPSK-receiver’s IF, polarity, 22kHz, symbol rate, FEC,
sound and sub-text language. Each satellite receiver is programmed individually.
In order to program the unit, the digital receiver must be powered up (the green LED is lit up)
and a correct satellite signal must be connected.
BUTTONS
Up
- use this button to select settings on menus.
Left
- use this button to select numbers. To change the channel.
Right
- use this button to select numbers. To select options on the Info menu.
Down
- use this button to select settings on menus.
MENU
- use this button to activate the menu. De-activate the Info menu.
ENTER
- save and move to the next menu option.
Please refer to the menu tree on page 55.
One of the features of the DT-2200 is the self test. When
it’s started various parts will be tested and the results will be
shown on the TV screen.
Press and hold the
Menu
button when powering up the
receiver.
• PASS=OK
• FAIL=NOT OK
SelfTest
CA (Cimax)
at 0x80 Pass
VP310 (QPSK)
at 0x1c Pass
Satellite Tuner
at 0xc2 Pass
Serial E2
at 0xa0 Pass
Audio DAC
at 0x82 Pass
Video DAC
at 0x54 Pass
Self test
01042-4 DT-2200 ENG-1.p65
2001-09-26, 08:46
53
