MANUAL
DT-2200
61
START TRANS
SCAN
NO
PID setting is only to be used by advanced users
if the auto search
function fails. To set the V-PID, A-PID, PCR-PID and Text-PID, the
PID tables in the channel lists must be converted into HEX.
PCR-PID is compulsory information, (it is often the same as V-PID for
TV channels and A-PID for radio channels). Text-PID is not compulsory
in order to receive sound and pictures, please enter 0000 instead.
SEARCHING FOR CHANNELS “PID = PACKET ID”
MENU
Press the Menu button. Then press the Enter button until the
ENTER
Start Trans Scan menu appears.
Select NO for PID setting. See page 58.
Use the Left/Right and Up/Down buttons to set the required
PID.
ENTER
Press the Enter button to start the channel search.
AUDIO LEVEL
CURRENT 15
AUDIO LEVEL
It’s possible to change the audio level with 15 steps. Choose 15 for full
audio range and change it with the Up/Down buttons.
Press the Right button eight times.
Select the required audio level with the Up/Down buttons.
Press the Right button to move to the next step on the menu.
SUBTITLE ”position”
A change of the subtitle position i possible in six steps from zero to five.
(Default 2).
Press the Right button six times.
Use the Up/Down button to select the required transparency.
Press the Right button to move to the channel menu.
SUBTITLE
Position.
2
PID setting
01042-4 DT-2200 ENG-1.p65
2001-09-26, 08:46
61