MANUAL
DT-1700
6
Programming buttons
The DT-1700 is programmed using the Menu, Enter, Up, Down, Right and Left buttons and the display.
In order to programme the digital receiver correctly, it must be switched on and receiving a satellite
signal.
See menu tree on page 7 for available menu options.
BUTTONS
Up
- is used to select menu settings.
Left
- is used to select numbers. To change channels.
Right
- is used to select numbers. To select options on the Info menu.
Down
- is used to select menu settings.
MENU
- is used to activate and de-activate the Main menu.
ENTER
- is used to save and move to the next menu option.
15 pole D-sub-CONTACT
There is a D-sub-contact on the front of the DT-1700. This is used when downloading software.
Button lock
When the button lock is activated, a key symbol
is shown in the display. It can be de-activated
by pressing the MENU and ENTER buttons at
the same time for approximately 2 seconds.
50009-2 Bruksanvisning DT-1700 ENG-1.pmd
2005-02-24, 11:02
6
