23
SCHLIESSEN - CLOSE
KIPPEN - TILT
+
–
+
–
–
+
1
2
Testing the e-hardware using the commissioning device
1. Connect the power supply line
1
to the commissioning device and plug the power supply into the socket.
The green LED in the middle of the device must be lit.
2. Connect the wires of the connection line
2
to the commissioning device. The middle wire (white) must
be connected to the middle connection (yellow), the black wire to the plus connector (red) and the outer
wire (green) to the minus connection (black). The stripped wires are clamped and fixed in the respective
terminal by pressing the black button.
Summary of Contents for MULTI-MATIC
Page 26: ...26 R 1 kΩ 0 5 W R T2 T1 M 6 m 24 V DC 100 240 V AC L PE N Electrical assembly of e hardware ...
Page 33: ...33 ...
Page 34: ...34 ...
Page 35: ...35 ...
