Instruction Manual
MAN-004
18
www.macmedical.com
Timer Operation Display and Programming
Time Display: Accumulates time when the timing start input is active. Timing will not take place when the
external or front panel reset is active. The leftmost digit is the time value legend.
Down Key: When the program input is active this key is used to scroll through the menu items. After a menu item
has been chosen for editing, the down key is used to set the value for the currently selected
(flashing) digit.
Next/Reset Key:
Resets the accumulated time if Front Panel Reset is enabled in Programming Mode. When the
program input is active this key is used to select a menu item for editing (left most digit will begin to flash) and
then move to the desired digit to be changed.
Programming -
Programming parameters can be accessed, when the Program Enable input is active, by pressing the Down
key. To edit a parameter use the Down key to scroll until the desired parameter appears on the screen.
Pressing the Next key will cause the leftmost digit of that value to begin to flash. Use the Next and Down keys in
combination to choose individual digits and change their value.
Front Panel Reset Enable: When active (ON) the time value, when being displayed, can
be reset by pressing the Next/Reset key. If set to OFF, the time value can only be reset
through the remote input.
Time Format: Sets the units in which the elapsed time will be accumulated. Use the next
key to scroll through the available choices: Seconds, Minutes (_ _ _ _ _ . _), Hours (_ _ _ _
_ . _) , Hours: Minutes:
Seconds.
Note:
On initial start-up, as well as after any programming changes, it is necessary to
reset the unit before begining operation
VEEDER-ROOT
R
1. Time Display
3. Next/Reset Key
345678
S
2. Down Key
EAGLE SIGNAL
o n
______
S .
1 .
