28
SELECTING AND SAVING STATIONS MANUALLY
•
Hint: Before beginning to tune in stations manually, obtain the available DAB / DAB+ stations
channel / frequency information for your area.
•
Switch on the appliance.
•
Press SOURCE button on the remote control or button on the appliance repeatedly to
choose DAB mode. [FULL SCAN] is shown in the display.
•
Press the TUNE- / TUNE+ buttons until [MANUAL] is shown in the display. Press to confirm.
•
Now you will see 5A 174.928MHz in the display.
•
Press the TUNE- / TUNE+ buttons to display a particular channel / frequency, the display will
show the channels from SA to 13F and the associated frequencies.
•
When the desired channel is displayed, press the button and the signal strength will be
displayed. To add the channel, press the button again.
•
Add additional channels in the same way and then press the MENU button to exit manual
tuning mode.
•
The radio will return to the first station and the new stations will be added.
•
Use the TUNE- / TUNE+ buttons to move through the stations available and press the
button to listen to the station.
Note: Up to 30 stations can be saved.
AUTO-SCAN AND STORE PRESET STATIONS
•
Switch on the appliance.
•
Press SOURCE button on the remote control or button on the appliance repeatedly to
choose DAB mode.
•
Press the MENU button. [FULL SCAN] is shown in the display.
•
Press II button and the unit starts scanning DAB / DAB+ stations around your area.
Scanning O is shown in the display.
•
Once the scan is completed, the radio returns to play the previously-selected station or first
station on the station list.
•
Use the TUNE- / TUNE+ buttons to move through the stations available and press the
button to listen to the station.
RESET DAB SETTINGS
•
Switch on the appliance.
•
Press SOURCE button (5) on the remote control or button on the appliance repeatedly to
choose DAB mode.
•
Press the MENU button. [FULL SCAN] is shown in the display.
•
Presses the TUNE- / TUNE+ buttons repeatedly until [SYSTEM] is displayed then press the
button to confirm, now [RESET] will be displayed.
RESET DAB SETTINGS
•
Press the button [RESET N] will be displayed, use the TUNE- / TUNE+ buttons to toggle to
[RESET Y] and then press the button to start the raset process.
•
Once the reset is completed, the unit will then automatically perform a full scan. All stored
stations will be lost during reset.
Summary of Contents for MMC 400
Page 1: ...MMC 400 BEDIENUNGSANLEITUNG GARANTIEURKUNDE OWNER S MANUAL WARRANTY DOCUMENT...
Page 3: ...4 18...
Page 32: ......
Page 33: ......
