background image

8

WARNING! 

Burning fuel must be extinguished with special extinguishing 

extinguisher within reach in your work area! 

09  

Residual risks

Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. 
The following dangers can arise in connection with the structure and design of this product:  

•  Health defects resulting from vibration emission if the product is being used over long periods of time or not adequately managed 

and properly maintained. 

•  Injuries and damage to property due to broken cutting attachments or the sudden impact of hidden objects during use. 

• 

•  Burns, if touching hot surfaces.  

WARNING! 

interfere with active or passive medical implants! To reduce 
the risk of serious or fatal injury, we recommend persons 
with medical implants to consult their doctor and the medical 
implant manufacturer before operating this product!  

10  

Symbols

Familiarise yourself with them to reduce hazards like personal injuries and damage to property. 

V~

Volt, (alternating voltage)

cm

Centimetre

V  

Volt, (direct current voltage)

kg

Kilogram

Hz

Hertz

l

Litre

W

Watt

ml

Millilitre

mA

Milliampere

g/kWh

Gram per kilowatt per hour

mAh

Milliampere-hour

kg/h

Kilogram per hour

kW

Kilowatt

°C

Degree Celsius

cm³

Cubic centimetre

°F

Degree Fahrenheit

/min or min

-1

Per minute

dB(A)

Decibel (A-rated)

mm

Millimetre

m/s²

Metres per second squared

 

Polarity

 

With fuse

 

Safety transformer

 

Input

9

 

Output

 

Lock / to tighten or secure

 

Unlock / to loosen.

 

Note / Remark

 

Caution / Warning.

 

 

Read the instruction manual.

 

Wear hearing protection. 

Wear eye protection. 

 

Wear a dust mask

 

Wear protective gloves

 

Wear protective, slip- resistant footwear.

 

mm.yyyy

Manufacturing date code, year of manufacturing (yyyy) and month of manufacturing (mm)   

The charger is of protection class II. That means it is equipped with enhanced or double insulation.

Do not expose the product to rain or wet conditions.

Hot surface, do not touch! High temperatures on the product’s surfaces and structural parts that could 
cause burns, if they are touched. The product can also stay hot for a longer period of time after operation!

This product produces noxious exhaust fumes. If the product is used improperly, these fumes can lead to 
poisoning, a loss of consciousness or death!

Noxious exhaust fumes; do not operate or start the product in indoor rooms!

Check oil level before starting.

Attach the battery pack to the charger and connect the charger to a proper power supply, if the battery pack 
is discharged or has a low capacity.

Summary of Contents for MLMP575SP46























Reviews: