IV - ASSEMBLY
IMPORTANT
: Read entire operator’s manual before
you attempt to assemble or operate your new
pressure washer.
Remove Pressure Washer from
Carton
1. Set the carton on a rigid flat surface.
2. Remove everything from carton except pressure
washer.
3. Open carton completely by slicing each corner
from top to bottom. Use the flattened carton as a
clean, dry assembly surface.
Carton Contents
Items in the carton include:
•
Main Unit
•
Handle
•
High Pressure Hose
•
Spray Gun
•
Adjustable Nozzle Extension
•
Accessory Storage Bag
•
Axle
•
Wheel Kit (includes the following):
•
Wheels (2)
•
Retaining Pins (2)
•
Handle Fastening Hardware Kit (includes):
•
Carriage Bolts (2)
•
Plastic Knobs (2)
•
Parts Bag (includes the following):
•
Operator’s Manual
•
Engine Operator’s Manual
•
Safety Goggles
•
Maintenance Kit
•
Hose Fittings (2)
•
High Pressure quick connect fittings (2)
Preparing Pressure Washer for
Use
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged,
call the technical helpline at 0845 300 2577. If
calling for assistance, please have the model,
revision, and serial number from the data tag
available.
To prepare your pressure washer for operation,
you will need to perform these tasks:
1. Attach handle to main unit.
2. Install wheel kit.
3. Add oil to engine crankcase.
4. Add petrol to petrol tank.
5. Connect high pressure hose to spray gun and
pump.
6. Connect water supply to pump.
7. Attach nozzle extension to spray gun.
Attach Handle
1. Place handle onto base. Make sure holes in
handle align with holes on base. Insert carriage
bolts through holes from outside of unit and
attach a plastic knob from inside of unit.. Tighten
by hand.
Install Wheel Kit
The wheel kit is designed to greatly improve the
portability of your pressure washer.
NOTE
: Wheel kit is not intended for over-the-road
use.
Refer to Figure 1 and install the wheel kit as
follows:
6
Figure 1
