18
19
MLMP475iSSP46-M&S-2
MLMP475iSSP46-M&S-2
Getting
Started . . .
Getting
Started . . .
Assembly
WARNING!
The product must be fully assembled before the operation!
Do not use a product that is only partly assembled or assembled with damaged
parts!
Follow the assembly instructions step-by-step and use the pictures provided
as a visual guide to assemble the product easily!
Disconnect the spark plug connector (15) from .ark plug! Reconnect it after
assembly.
NOTE:
Take care of small parts that are removed during assembly or when
making adjustments. Keep them secure to avoid loss.
Handle bars
1.
in its storage position.
2. Turn the lower handle bar lock (23) about 90 degrees (Fig. 1). Repeat on the other
side to unlock the lower handle bar (5).
3. Unfold the lower handle bar (5) from storage position to working position.
4. Align the pin of the handle bar lock (23) with one of the handle support holes. Turn
back the lower handle bar lock (23) and swing the lower handle bar (5) slightly
until the handle bar lock (23) clicks in place. Repeat on the other side to secure
the position of the lower handle bar (5) (Fig. 2).
1
2
5
23
5
23
You will need
(items not supplied)
>
Suitable personal protective equipment
>
>
Suitable engine oil (SAE10W-30)
>
Suitable fuel (unleaded petrol)
>
Container to collect fuel
>
Container to collect oil
>
Lubrication oil/grease
>
Torque wrench (40-45 Nm)
(advisable items)
>
First aid kit
>
available
(items supplied)
>
Spark plug wrench (33)
>
Battery charger (34)
>
Operator’s manual of the
BRIGGS&STRATTON engine (35)
Before you start
Before you start
